warping

West Point Model 844V& 881 Warping Creel

美国West Point公司的844V型和881型筒子架

It should have prevented rain water warping the door trim.

这原本应当能够防止雨水把门的饰边弄翘的。

Sizing efficiency can reach above 85% and loom efficiency can reach 82% by innovating tension area of warping process, adjusting sizing processing route and size formula, innovating sizing method and reed-in method.

通过改进整经工序张力区域划分、调整浆纱工艺路线和浆料配方、改进浆纱及穿筘操作方法，使浆纱好轴率提高到85%以上，织机效率达到82%左右。

The desilting and warping work on certain sections of the Yellow River is very important.

黄河河段的放淤、清淤工作十分重要.

This effects called warping.

此种效应称为翘曲.

A discussion on effect of different creel positions of cones on Warping tension of yarn sheet

筒子在筒子架不同位置上对片纱整经张力影响的分析和探讨

But it is aperplexing problem to reduce and prevent the warping phenomenon during injection molding.

但如何减少、防止制品成形中时常发生的翘曲现象,是经常困扰工程师的一大难题.

The matrix stripes, warping desktop, flying objects, matrix tunnel and other visual effects are included.

矩阵棉衣, 放淤台式机, 飞行物体, 矩阵隧道及其他视觉效果方面都包括在内.

It should have prevented rain water warping the door trim

这原本应当能够防止雨水把门的饰边弄翘的。

This frame is known as a creel and its function is to hold the supply packages in a manner so as to facilitate warping.

该架子统称为筒子架或纱架，其作用是使供纱卷装便于整经。

Effect of Warping Dams in Silt-Laden and Coarse Sand Region of the Middle Yellow River to Sediment Grading

黄河中游多沙粗沙区淤地坝对泥沙的分选作用

A warping, bending, or cracking, as that by excessive force.

翘曲, 弯曲,裂开:翘曲 、 弯曲或裂开, 如过强的外力引起.

A viselike device for keeping a racket from warping.

球拍夹虎钳状的防止球拍弯曲变形的装置.

Good stitching can be challenging, and a poor job can lead to tissue warping.

好的缝合实在是不容易做到, 而糟糕的缝合会导致组织变形.

Thus, the concept of wing warping was born.

翘曲机翼的概念由此诞生.

The product can be directly made into flat thimble without warping and deformation.

该产品直接制作扁顶针不翘曲、不变形.

Thermal buckling is a common problem for large flexible space structures consisting of thin-walled open section beams. A two-node thin-walled open section beam element was developed with a warping degree of freedom.

针对含开口薄壁杆件的大型空间柔性结构热屈曲问题，发展了一种包含翘曲自由度的二节点开口薄壁杆单元。

The yarns must be parallel and under uniform tension. This, then, is the purpose of warping.

纱线必须相互平行,且张力均匀, 这就是整经的目的.

This paper introduces a good many factors influencing the moisture-free weight per unit area of warp knitted fabric, measures and theoretically analyzes the fineness of raw material, warping tension, loop length, thermal setting, and so on.

介绍了影响经编织物干克重的诸多因素。对原料细度、整经张力、线圈长度及热定形等影响因素进行了实际测试和理论分析。

The machine is special fot warping rounded brand mold cutting tool beyound ∮30.

刀片卷曲机是专为卷曲∮30以上圆形模切刀而设计.

Otherwise the building would have been one characterized by warping and bending.

否则,它可能已经成为了一座以翘曲和弯曲为特征的建筑了.

In the end relationship between temperature warping stress and engineering economy is pointed out in order to instruct practice.

指出应正确衡量温度应力与经济的关系，从而能做出最佳选择。

After the analysises above, it found the size effect laws on both load stress and temperature warping stress, as well as laws of stress reduction effect of dowel bars and collars on plates with 4 free edges.

经分析，得出了四边自由的路面板荷载应力和温度翘曲应力的尺寸效应规律，以及传力杆或水平拉杆对非自由板的应力折减作用。

It should have prevented rain water warping the door trim...

这原本应当能够防止雨水把门的饰边弄翘的。

A model test was designed to simulate the consolidation process of warping soil, the validity of theoretical equation and the solution methods presented in this study.

设计模型试验模拟渗压作用下淤填粘土的固结过程并对本文建立的理论模型和求解结果进行验证。

Slab casting with thin wall 、 large area and unprocessed surface is easy to produce warping deformations and surface quality defect, etc.

壁薄、大面积、表面不加工的平板铸件易出现弯曲变形、表面质量不好等问题。

Arranging cheese reasonably, set suitable tension washer weight should be adopted in warping process.

整经工序要合理排放筒子，并合理设置张力垫圈重量；

Tilting, warping, and changes in elevation can seriously affect canals and shoreline facilities of various kinks.

倾斜 、 翘曲和高程变化可以严重地影响水渠和各种岸边设备.

The process of degenerating. In the case of warping, this means that the ballooning of the yarn coming from the creel package must be controlled.

这就意味着，在整经过程中，对从筒子上退绕下来的纱线形成的气圈要加以控制。

Along one side, the divider is warping.

一侧, 分离器是翘曲的.