vitrified

Traditional wetting agent often leads to defects in vitrified abrasive wheel.

传统的润湿剂在陶瓷砂轮中存在不可避免的缺陷.

What is interesting, Mill presents as a gift the present is pair of vitrified pot chopsticks.

有意思的是, 米勒赠出的礼品是一双瓷质的筷子.

Study on Vitrified Method of Lats Knock-out Mice Embryo

Lats基因敲除小鼠胚胎玻璃化冷冻的研究

Porcelain: Vitrified pottery with a white, fine-grained Body that is usually translucent.

瓷器: 一种用白色细颗粒的材料制成的通常为不透明的玻璃化陶瓷.

Test method for acid resistance of vitrified clay pipe

GB/T2835-1998陶管耐酸性能试验方法

Li2O ZnO SiO2 system glass ceramic was used to replace conventional glass as the bond of vitrified bond diamond grinding wheels, in hope of overcoming the disadvantages of conventional glass bond such as bad soakage and high thermal expansion coefficient gap between vitrified bond and diamonds.

本文研究用Li2O ZnO SiO2系微晶玻璃代替普通玻璃用作金刚石砂轮结合剂以克服普通玻璃结合剂对金刚石浸润性差、热膨胀系数与金刚石相差大的缺点。

The bond exhibited typical glass phase with low melting temperature and high bending strength of strips ( 53.62-93.34MPa). The microstructure analysis indicated the enhancement of the bonding strength resulted from the chemical reaction between the vitrified bond and microcrystal alumina ceramic.

结合剂为典型玻璃相，熔融温度较低，试样抗折强度为53.62-93.34MPa，微观分析表明两者间发生了化学反应，增强了结合剂对磨粒的把持力，提高了磨具的强度。

For many years, some conditional large vitrified abrasives factories have taken physical examinations many times for workers, and the ratio of kiln workers having suffered from silicosis is increasing year by year.

多年来一些有条件的大型陶瓷磨具厂多次进行职工体格检查，发现磨具装出窑工人患矽肺病率逐年有所增加。

Experiment study on segments of vitrified CBN wheel based on high speed grinding

高速陶瓷CBN砂轮贴片的实验研究

Study on Affecting Factors on Strength of Vitrified Bond CBN Tools

陶瓷结合剂CBN磨具强度的影响因素研究

Test and analysis have been taken in view of crack appearance regularly of de-vitrified glass, It points out the crack is effected on lumpiness of recovery cullet, melting rate of furnace, heat treatment technology etc.

针对微晶玻璃炸裂出现的现象与规律，进行了试验与分析，指出回头碎玻璃的块度、熔化窑的熔化率、热处理工艺等对炸裂的影响；

This paper introduces an automatic temperature control system for vitrified tile kiln.

本文介绍的玻化砖窑炉温度自动控制是采用工业控制计算机协调解耦控制、智能仪表控制和手动控制等多级控制方案。

Research on different grading of vitrified microsphere-polystyrene grain mixed thermal insulation mortar

不同级配玻化微珠-聚苯乙烯颗粒双掺建筑保温砂浆研究

Analysis of orientation error of vitrified porcelain tile side-grinding and angle-cutting machine tool

瓷质墙地砖磨边倒角机定位误差分析

Result showed that the content of ZRs and IAA in the vitrified plantlet was lower than that in the normal plantlet, while the content of GA1/ 3 and ABA was higher.

玻璃化苗与正常苗从形态及繁殖系数上都明显区别于正常苗，内源激素测定结果显示ZRS和IAA的含量明显少于正常苗，GA1/3和ABA含量高于正常苗。

It is suitable for manufacturing of vitrified and tool, and for lapping , polishing and blasting.

用其制造的磨具,适用于碳素钢 、 青钢等的磨削.

There was no accumulation of starch grains in the sieve tube. 2 There were significant differences in physiological characteristics between the vitrified and normal apple shoots in vitro.

2苹果玻璃化试管苗的生理特性与正常试管苗有显著差异。

Vitrified matter expelled by a volcano.

熔岩火山喷发的玻璃化物质.

The vitrified soil, as hard as granite, can be used for landfill.

玻璃化的土壤类似坚硬的花岗岩, 可以用于填埋.

After hydrolytic lactalbumin was added into media, the vitrified seedlings reduced, but the contamination rate was always very high.

培养基中加入水解乳蛋白后玻璃苗减少，但污染率一直很高。

It offered a new method to improve the properties of vitrified bond of CBN grinding wheel.

这也为今后CBN砂轮陶瓷结合剂性能的提高提供了新方法.

A Study on the Batching Proportion of High Strength Three-element Bond for Vitrified Abrasive Tool Abrasive Machining

陶瓷磨具长石粘土硼玻璃三元系统高强度结合剂配料比实验设计研究

Crack forming is one of the main reject phenomenon for vitrified abrasive wheel.

裂纹是陶瓷砂轮的主要废品现象之一.

A temperature control system of technology testing furnace for vitrified abrasive tools was designed paper.

介绍了陶瓷磨具工艺试验炉温度控制系统的设计方法.

Suitable for electroplated, vitrified and metal bond tools, wheels etc.

适用于电镀 、 瓷、属结合剂体系磨具 、 轮、具制造.

Measuring method for size and deviation of vitrified clay pipe

GB/T2837-1998陶管尺寸及偏差测量方法

This paper describes the dressing principle and its grinding characteristics of vitrified bonded CBN wheels trued by cup truer.

研究杯状砂轮修整器对C BN砂轮的修形原理，及修形后砂轮磨削特殊钢的加工特性。

Cut tube end square. Ream, burr and size. Measuring method for size and deviation of vitrified clay pipe

垂直切割管道。刮除毛刺，测量尺寸。GB/T2837-1998陶管尺寸及偏差测量方法