maximum error的例句大全

Judging the Error in Roundness by Maximum Inscribed Circle Method

用最大内切圆法评定圆度误差

An evaluating algorithm of maximum inscribed circle for roundness error in the Cartesian coordinates and a measurement model of roundness error is introduced in this paper.

介绍了一种在直角坐标系下利用最大内接圆法评价圆度误差的方法，建立了圆度测量模型。

It showed the correctness of the criteria of roundness error and relationship between the minimum zone circle, minimum circumscribed circle and maximum inscribed circle and the effectiveness of the methods for evaluation of roundness error.

也验证了圆度误差判别准则及最小区域圆、最小外接圆和最大内接圆特征点间的相互关系的准确性和误差评定方法的有效性。

based on the idea of variable structure, the new method designs the initial structure model uniformly, and adds new fuzzy rules to improve the precision of t s fuzzy system using the maximum absolute error ( mae) as the index.

该算法基于变结构构造法模糊建模思想，均匀设计模型的初始结构，以绝对误差为建模指标，通过增加模糊规则来提高TS模糊系统的精度。

the result of stibium electrode's determining ph values of two standard buffer fluid in laboratory showed that the maximum absolute error was 0.23 when temperature went below 60 ℃ and 0.46 when 70 ℃.

室内实验中锑电极测定两种标准缓冲液的pH值，当温度小于60℃时，最大绝对误差为0.23；温度为70℃时为0.46。

But with the local maximum induced by error may occur while the global optimization performed.

但该方法由于插值等因素的影响,存在着搜索过程的局部极值问题,这影响着配准的鲁棒性.

An Interval Combination Forecasting Model of Minimizing Maximum Absolute Error

最大误差绝对值达到最小的区间组合预测模型

Special attention has been paid to relationship between the end point error and maximum sharpness index for precipitation titration.

导出了一个内含最大敏锐指数的终点误差公式，由此获得了一个计算沉淀滴定突跃范围的公式。

The film thickness error of each layer is obtained by calculating the Macleod maximum sensitivity.

计算膜层的Macleod极值灵敏度，得到所选膜系各个膜层的误差要求；

That could actually be a maximum of this error function D.

这可能会，令函数D的误差达到最大。

Compared with the experimental data now available the average and maximum calculation error of pure water saturated pressure is respectively 0.09% and 0.44%.

与现有实验数据比较，纯质水的饱和压力计算平均误差为0.09%，最大误差为0.44%；

In comparison with the Parks McClellan method, the new method has greatly reduced stopband error energy with the slight increase of maximum stopband gain.

与Parks－McClelan方法相比，该文方法在牺牲较少的最大阻带增益的情况下极大地降低了阻带误差能量。

In other conditions, the area of error circle is maximum, and the area of error ellipse is 96 8%~ 99 2% of error parallelogram.

在其余场合，误差圆的面积为最大，而误差椭圆面积为四边形的96.8%～99.2%。

Based on channel sampling data statistics, this dissertation proposed two time skew error estimation algorithms using the adaptive blind estimation and the maximum likelihood correlation estimation method.

根据通道采样数据的统计特性，分别提出了基于迭代盲估计和极大似然估计的时基误差估计算法。

Results The maximum angle velocity ω max, maximum angle acceleration α max, and positioning error e s all reached design specifications.

结果最大角速度ωmax、最大角加速度αmax、定位误差es均达到了设计指标，获得了满意的投影效果。

Through the comparison of three torsion strength formulae of circular shafts, the error function, error curve and error maximum between those formulae and the formulae of true shear stress in torsion are presented.

通过对三个圆轴扭转强度计算公式的比较，给出了它们与真实扭转强度公式的误差函数和曲线及误差的最大值。

This paper presents the results of training HMMs using a minimum error criterion ( ME) instead of conventional maximum likelihood.

本文研究了使用最小差错准则训练隐含马尔科夫模型（HMMS）而不是传统最大似然准则。

This algorithm adopted the relative Bhattacharyya distance summation of each feature as the criterion function to select the features which contributed more to the reduction of classification error. These features then could be used for Gaussian maximum likelihood classification.

该算法以各特征的相对Bhattacharyya和作为准则函数选择能有效降低分类错误率的一组特征，最后利用这组特征进行高斯似然分类。

The average velocity field with maximum absolute error of 54 m/ s and maximum relative error of less than 2% in XJ area is tested by using VSP of two new wells.

应用该方法在XJ地区建立的平均速度场，经两口新井的VSP检查，最大绝对误差为54m/s，最大相对误差小于2%。

And the error is detailed into metal-poor stars observation error and the typical satellite observation error, so that our model for maximum optimization.

并将误差详细的分为了贫金属星观测误差和典型星观测误差，使我们的模型最大限度的优化。