camshaft的例句大全

Testing and Analysis of Temperature Field of Camshaft during Solidification Produced by Shell Mold with Iron Shot Backing

壳型填铁丸工艺条件下凸轮轴凝固温度场测试及分析

This paper established a jet-pulse width alcohol, oil supply tension bar displacement, camshaft speed signals such as the model of relations.

由此本文建立起喷醇器脉冲宽度、供油拉杆位移量、凸轮轴转速等信号量的模型关系。

Fit the short guide rails between the camshaft timing gears.

安装凸轮轴正时齿轮之间的短导轨。

The effection on timing driving system by construction of the admission gear has been studied in this paper. A new effective design calculation way of the engine timing belt drive struction has been developed through designing and studying double overhead camshaft timing driving struction of 469Q engine.

通过469Q汽油机双顶置凸轮轴正时传动机构的设计研究，开发了一种有效的发动机正时同步带传动机构的设计计算方法，对发动机正时传动机构的设计具有重要参考价值；

The practical production has verified that the overmeasure of camshaft workpieces has been well distributed and met the working requirements when the cam masters designed in this way have been used.

经生产实践验证，用这种方法加工出的凸轮工件余量均匀，符合工艺要求。

Structural Character Design Manufacture of Shell Molding Camshaft Die

壳型铸造凸轮轴模具结构特点与设计制造

The result showed that the Rockwell hardness of the high pearlite-containing nodular iron camshaft increased with increasing of its nodularity and pearlite content.

结果表明，高珠光体含量球铁凸轮轴的洛氏硬度随着球化率和珠光体含量的升高而增加。

Study of Coaxality of Main Spindle Hole and Camshaft Hole

柴油机主轴孔、凸轮轴孔同轴度探讨

This paper studies concept, calculation and gauge design concerned with coaxality of main spindle hole and camshaft hole and points out some common errors.

对柴油机主轴孔、凸轮轴孔同轴度的有关概念、计算方法、量规设计理论进行探讨，指出通常一些做法的错误。

Structural Analysis and Improvement of the Base Plate in High Speed Camshaft Grinder

高速凸轮轴磨床垫板的结构分析与改进

Since the engine has no valves, it doesn't need any camshaft, valve lifters and so on.

因为发动机没有阀门，它不需要任何凸轮轴、起阀器等。

Intelligent Parametric CAD for Step Gating System of Cast-iron Camshaft

铸铁凸轮轴阶梯式浇注系统智能参数化CAD研究

Camshaft from the crankshaft through the timing belt or gear or chain drive.

凸轮轴由曲轴通过齿形带或齿轮或链条驱动。

The Quality Inspect System of Expand Camshaft Based on the Templet Suited

基于模板匹配的可扩展凸轮轴质量检测系统

The off-centre of the camshaft which is mounted on the detector affects the accuracy of measuring the cam outline dimension.

凸轮轴在检测仪上的安装偏心，影响凸轮轴上凸轮廓形尺寸的测量精度。

As the camshaft continues to rotate, the high spot moves way from the valve mechanism.

因为凸轮轴继续旋转, 凸轮轴上的凸起部分离开气门装置.

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半.

In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.

在发动机里, 机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上.

This is called an overhead camshaft arrangement.

这被叫为顶置凸轮轴装置.

The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.

那金属轴叫凸轮轴, 在发动机里的每个气门一般有各自的凸轮.