A research is made on the production process of the high NV reactive acrylic resin by solution polymerization.

The Synthesis of Water Soluble Highly Reactive Melamine Resin

水溶高反应活性蜜胺树脂的合成

Research on the High NV Reactive Acrylic Resin and Its Paints

高固含量反应性丙烯酸酯树脂及其涂料的研究

Study on high solid reactive acrylic resin

高固体分活性丙烯酸酯树脂的研究

Specially make the focal point on high reactive phenolic resin system.

重点论述了高反应活性的树脂系统。

The process of rotational foaming molding of liquid reactive resin was studied, with unsaturated polyester resin as the shell of unfoamed resin moulded part, and polyurethane as foamed core layer.

以不饱和聚酯树脂作为非发泡树脂成型制品的外壳，用聚氨酯树脂发泡形成泡沫芯层，研究了液体反应树脂的旋转模塑发泡成型泡沫夹层制品的工艺过程。

The liquid composite molding process is an advanced process for manufacturing composites with high performance and low cost., The dry fibrous reinforcements are wetted with the reactive resin in this process.

复合材料液体模塑成型技术（LCM）是一种高性能低成本先进复合材料制造技术，成型过程中干的纤维增强材料被反应性树脂浸渍。

High-viscosity poly ( lactic acid)( PLA) was prepared using thermosetting reactive resin ( PME) by in situ reactive extrusion.

采用热固性反应树脂（PME）和聚乳酸（PLA）反应挤出制备了高粘度PLA。

The principle of rotational molding machine for liquid reactive resin was discussed. Mechanically driven design and electric control design of this machine were introduced specially.

阐述了液态原料旋转模塑机的工作原理，着重介绍旋转模塑机的机械传动方案设计及电气控制系统设计，并说明了使用过程中的注意事项。

The influence of thixotropic reactive resin& Ac resin the automobile coating have been studied.

研究了触变性反应型树脂（简称AC树脂）对汽车涂料性能的影响。

Application of Thixotropic Reactive Resin in Automobile Coatings

触变性反应型树脂在汽车涂料中的应用

Separation of Chemical Mechanism of Viscous Increase and Physical Mechanism of Viscous Falling for Reactive Resin System

反应性树脂体系化学增黏和物理减黏机制的分离

Design and manufacture of rotational molding machine for liquid reactive resin

液态原料旋转模塑机的设计与制造

As a result, after coating, both fabrics dyed with Acid Orange 7, Reactive Red KD-8B or Direct Red F, their fastness in particular sunlight fastness was improved greatly.

试验结果表明，经复合膜整理后，无论用酸性橙7、活性红KD8B，还是直接红F染色的两种织物，色牢度特别是日晒牢度均有较大改善。

The product, PAC, was applied to the treatment of dyeing wastewater. The effect of PAC on removing Yellow Clayton, Methyl Orange, Food Yellow and Reactive Red was investigated.

该产品应用于染料废水的处理，考察了其对不同浓度的达旦黄、食品黄、甲基橙和活性红色度的去除效果。

Under conditions of optimum combinations of above factors, pellets HX demonstrated better adsorptive effect on dye of reactive red X-3B. Fig 6, Tab 3, Ref 9

在所筛选的最佳吸附条件下，菌丝球HX对活性艳红X3B表现出了更好的吸附效果.图6表3参9

Definite RD in which the decolorizing efficiency of dyes was up to 99.5% decreased when the initial concentration of dyes increased for the reactive red and reactive violet dyes.

对活性艳红和活性紫，起始浓度增加则达到99.5%脱色率的投药比降低。

By using the agar gel electrophoresis technique, it is found that the strain has a plasmid and fails to decolorize Reactive Red X-3B after removing its plasmids.

结果还表明，该菌株质粒在琼脂糖凝胶电泳图谱上仅有一条质粒带。

Liquid Reactive Red K-2BP was prepared, and effect of variety and dosage of buffer solution on concentrated liquid dye was investigated through measuring the stability and hydrolysis of liquid dye.

以活性红K-2BP配制液体染料，通过测试液体染料的稳定性及耐水解性能，综合考察了缓冲溶液的种类及用量对高浓度液体染料各方面性能的影响。

The effect of purple nonsulfur photosynthetic bacteria on decolourization of reactive red X-3B under different conditions was studied with glucose as carbon source and yeast extract as nitrogen source.

实验研究了以葡萄糖为外加碳源、由酵母膏提供氮源时不同的影响条件下紫色非硫光合细菌的混合菌种对染料活性艳红X-3B的脱色效果。

Degradation of simulated Reactive Red 2 ( RR2) wastewater by ultrasonic technology, Fenton reagent oxidation, and a combination of the two processes was studied.

采用超声/Fenton试剂氧化耦合的方法对模拟染料废水活性红2进行降解处理研究。