The traditional rolling force model of4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.

On the basis of analyzing factors to influence the rolling model of tandem cold strip mill and combining rolling theory with experiment, a new rolling force model was developed.

在分析冷连轧机轧制力模型各种影响因素的基础上，通过理论推导结合现场试验建立了新的轧制力模型。

Optimize rolling parameters and roll shape collocation of tandem cold strip mill, improve rolling efficiency and product quality

优化冷连轧机轧制参数和辊型配置提高轧制效能和产品质量

The research and application of the rolling force model for 4-stand tandem cold strip mill

四机架冷连轧机轧制力模型的研究与应用

Joint control of working roll bending and CVC position for tandem cold strip mill

冷轧带钢工作辊弯辊和CVC位置的联合控制

The Network Structure and it's Technical Performance of the Control System on Five Stand Tandem Cold Strip Mill

五机架全连续冷连轧机控制系统的网络结构及其工艺技术特色

Application of double stepped backup rolls 4 stand tandem cold strip mill

双阶梯支承辊在四机架冷连轧机上的应用

Design and application of roll shape optimizing system based on genetic algorithms for tandem cold strip mill

基于遗传算法的冷连轧机辊型配置优化系统的开发及应用

Optimal means based on immune genetic algorithms for rolling parameters of tandem cold strip mill

基于免疫遗传算法的冷连轧机轧制参数优化方法

The Development Prospect of the AC Drive System in Tandem Cold Strip Mill

带钢冷连轧机交流传动的发展前景

Research on a rolling force model for tandem cold strip mill

串列式冷连轧机轧制力模型研究

The best electric circuit of converter is the tandem switch dropping-voltage circuit.

而变换器的最佳电路结构是串联开关降压电路。

Discussion on Replenish Fuel Question of Tandem Cylinder Synchronous Circuit

对串联油缸同步回路补油问题的讨论

Through a single operation, this kind of tandem/ cascade reaction highly efficiently achieves a sequential construction of both carbon-carbon and carbon-heteroatom bonds. These reactions also provide simple, efficient and new approaches for the synthesis of multiply functionalized organic compounds containing carbon-heteroatom functionality.

该反应经一步操作，高效地实现了碳-杂原子键和碳-碳键的有序构建，为合成含杂原子的多官能团化合物提供了简单有效的新途径。

In this paper the curves of tandem cascade aerodynamic parameters ver-sus incidences have been given on the basis of the results of A_ ( 40) profile tandem cascade tests.

本文根据A（40）叶型串列叶栅试验，给出了串列叶栅气动参数随冲角变化的关系曲线，计论了缝隙收敛度对流动状态的影响，进一步充实了缝隙流动机理的阐述。

The flow field of the stator with tandem cascade of French Turmo-ⅲ c small aero-engine was analysed.

对法国TurmoⅢc小型航空发动机静子串列叶栅流场作了计算与分析。

Exploring the aerodynamic feasibility of substituting aspirated cascade for tandem cascade

吸附式叶栅代替串联叶栅气动可行性探索

Numerical Simulation for 3-Dimensional Viscous Flow Field of Stator with Tandem Cascade

串列叶栅静子粘性全三维流场的数值模拟

Effects of freestream turbulence on the losses, fluid turning angles, pressure coefficients and boundary layer velocity profiles of a double circular arc tandem cascade were investigated experimentally.

通过实验，测量了自由流紊流度（Tu）在1.4%－6.7%范围内，一双圆弧串列叶栅总压损失系数、气流转角、附面层内速度分布以及吸力面压力系数。

The results shows that instantaneous turning center is not in the centerline of rear tandem axle, but offset backward the centerline of rear tandem axle, and the offset value increases with the lengthening of rear tandem axle wheelbase;

结果表明，瞬时转动中心不在后二轴中心线上，而是相对后二轴中心向后偏移，且偏移量随后二轴轴距增大而增大；

Take a vehicle for example, discuss the change regularity of the second axle steering angle, offset and turning radius with different rear tandem axle positions and with different steering angles of the first axle.

以某车型为例讨论了二轴转角、偏移和转动半径分别在不同双后轴距离处以及一轴不同转角条件下的变化规律。