adhesion strength

In this Paper, Influence of adhesion strength of PP weaved cloth and Kraft Paper was discussed by content of LDPE EVA and smear technology.

讨论了LDPE、EVA含量及复合工艺对PP编织布与牛皮纸复合强度的影响。

Application of epoxy resin adhesives are widely because they have excellent adhesive ability on a variety of materials and have the advantages of high adhesion strength, excellent electrical properties, low shrinkage, dimensional stability and good weathering resistance.

环氧树脂胶粘剂应用广泛，对多种材料具有优良的粘结能力，具有粘结强度高、电性能优良、收缩率低、尺寸稳定、耐候性强等优点。

The designer should the experience, the formula rationally and calculate the internal and adhesion strength accurately.

工程实践中,设计者应当总结经验, 对锚筋内力、桩承载力和粘结力采用合理公式并准确计算.

The effects on the adhesion strength of HDPE/ APS-glass assembly were studied at the different plasma treatment time, lamination temperature and lamination time. The relation between the hydrophilicity and the adhesion of HDPE film was investigated.

研究不同等离子体处理时间、成层温度和成层时间对HDPE/APS玻璃粘接效果的影响，考察HDPE膜的亲水性与其粘接性之间的关系，寻找HDPE/APS玻璃最佳粘接条件。

The ultrasonic cleaner was used to evaluate the adhesion strength of zeolite crystals on the substrate. The ultrasonic cleaning method, combined with XRD, SEM and other characterization techniques, is effective for characterization of zeolite membrane.

采用超声清洗的方法表征了分子筛晶体的附着强度，并用XRD和SEM等手段对分子筛膜进行了表征。

The "Scotch tape test" was designed to measure the adhesion strength of the metal coating to the PET fabric.

采用自主设计的透明胶带法测量金属与织物纤维的结合力。

The adhesive has higher adhesion strength than the conventional two-component PU adhesive used for laminating leather.

与常用的复合革用双组分聚氨酯胶粘剂相比,该胶粘剂具有较高的粘接强度.

Gecko-inspired adhesive micro& nano structures have been demonstrated to own high adhesion strength, reusable and self-cleaning features and have a broad application prospects in the fields of MEMS devices, biomedical devices and bio-mimetic robots.

仿壁虎脚趾制成的微纳仿生粘附结构具有高粘附强度、可重复利用、自清洁等特点，在微纳米器件、仿生医疗器件、仿生机器人等领域有着广泛应用前景。

The modified mortar which has better adhesion strength, dynamic cracking resistance and compatibility with the decorative facing and protective layer are used in external thermal insulation.

选择具有较优界面性能、抗裂、柔性变形能力，且与保护层及涂料层相容的聚合物砂浆应用于新型外墙外保温系统。

The effect of monomer ratio, the kind and concentration of keying agent on adhesion strength is also studied.

研究了单体配比、增粘剂种类、增粘剂用量对剥离强度的影响。

Theoretical Calculation on Adhesion Strength of Non occupying Coating to Sand Core

非占位涂料与砂芯附着强度的理论计算

The results showed that the aging properties and fatigue properties of compounds and the adhesion strength and H pull out force of semi products improved, and the scorch time and optimum cure time reduced by adding activated silk mica powder;

结果表明，绢云母粉活化后对胶料的老化性能、疲劳性能、半成品粘合强度、H抽出力等性能有所改善，但焦烧时间和正硫化时间缩短；

The matrix of Chinese Medicine Patcher was studied by uniform design and taking adhesion strength as index.

采用均匀设计法，以粘着强度为指标，筛选中药巴布剂基质。

Rubber adhesive packing tape, gook adhesion strength, water and cold proof.

感压性牛皮纸胶带, 粘性佳, 防水及耐候性优良,主要用于纸箱包装.

The results show that it is related to viscosity, stability, dry speed, adhesion strength.

结果表明，这些因素对胶粘剂的粘度、稳定性、干燥速度和粘贴强度有很大的影响。

Both of these physical phenomena to increase adhesion strength are very important.

上述两种物理现象对于提高粘合力都是十分重要的.

Evaluation for adhesion strength of hard coatings by wedged load test method

高强涂层结合强度的评价&楔形加载法

The effects of polymer dry powder on the adhesion strength of cement mortar at different curing conditions

不同养护条件下聚合物干粉对水泥砂浆粘结强度的影响

In the introduction of the preparation process of the grafted chloroprene rubber adhesive, the effects of reaction temperature, reaction time, initiator concentration and grafting efficiency on the adhesion strength were investigated.

本文研究了接枝氯丁胶粘剂的制备工艺，反应温度，反应时间，引发剂用量，接枝效率对胶粘剂粘接力的影响。

Rubber and plastics-Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

GB/T12833-1991橡胶和塑料撕裂强度及粘合强度多峰曲线的分析方法

This paper inquired into deeply the reason for being high strength in the puffing-inside adhesion of YW 1 inorganic adhesive from the Chemical, physical and mechanical.

本文从化学、物理、机械三方面深入地探讨了YW-1无机胶套接粘接形成高强度的原因。

The results showed that the adhesion strength of CPE/ SBS blend system had significant positive departure for PVC leatherette. And a pressure-sensibility thermosol with viscosity lower than SBS, adhesivity higher than SBS was obtained.

结果表明：SBS／CPE共混体系对PVC人造革的粘接有正协同效应，并可以得到熔融粘度比SBS小、而粘接力比SBS大的热熔性压敏胶粘剂。

Steel cord conveyor belts& Adhesion strength test of the cover to the core layer

GB/T17044-1997钢丝绳芯输送带覆盖层与带芯层粘合强度试验方法

The results showed that the composite emulsion had more excellent adhesion strength and water resistance.

结果表明:与普通乳液相比,复合乳液的干态粘接强度和耐水性明显提高.

The results show that mixed chain-extending agents and silane coupling agent evidently increase adhesion strength of polyurethane hot-melt adhesive, but tackifying resins could not increase adhesive strength of polyurethane hot-melt adhesive evidently.

结果表明：混合扩链剂和硅烷偶联剂能明显提高聚氨酯热熔胶的粘接性能，而试用的增黏树脂对提高聚氨酯热熔胶的黏结性能效果不明显。

In addition, the adhesion strength also related with rough surface.

另外, 粘附强度还与表面粗糙程度有关.

Study and Measurement of Adhesion Strength and Film Stress of Ag-Cu/ Ti Substrate Bilayer Films Composite Systems

Ag-Cu/Ti双金属膜结合强度及应力研究

Based on this model, we give the adhesion strength function depend on amplitude and the wavelength of the wavy surface.

基于该模型，我们给出了波状表面振幅以及波长对粘附强度的影响。

The manufacture process was improved from the first cold bonding-post curing to primary cure by using the mold having chevron cell, and the adhesion strength between the chevron type of pattern and the belt body was improved, and the conveyance capability was significantly increased.

制作工艺由起初的冷粘合二次硫化改进为在硫化机上加装人字花纹模具一次整体硫化，提高了花纹和带体间的粘合强度，明显地增加了输送带的输送量；

Interfacial adhesion strength of composite is characterized by the methods of torsional braid analysis.

使用扭辫分析对复合材料界面粘合强度进行了表征.