FEM

Meanwhile, Magnet and thermal shield were analyzed by using FEM, then their deformation and displacement were obtained.

同时，对磁体和冷屏进行有限元分析，得到了磁体和冷屏在低温下的变形与位移情况；

Research and application of the equivalent FEM model on the thermal insulation layer

大型管道绝热层结构等效有限元模型的简化研究及应用

Application of damage interface model for 3-D FEM analysis

接触面损伤模型应用于三维有限元分析

Combined Structure Method in FEM for the Analysis of Prestressed Beam

预应力梁的组合结构分析方法及其有限元实现

Implementation for higher order vector FEM and some key issues

高阶矢量有限元方法实现及关键问题

Strength Analysis of Thick-walled Cylinder under Thermo-mechanical Coupling Based on FEM

基于有限元方法的厚壁圆筒在热力耦合作用下的强度分析

FEM Analysis of the Ball Milling Machine Cylinder Based on ANSYS

基于ANSYS球磨机筒体有限元分析

Thermal and mechanical response of the internally pressured cylindrical shell under laser irradiation is analyzed by FEM/ Explicit, and the dynamic failure phenomenon, including thermal softening, ablation and bursting, are simulated.

采用动力有限元显式积分程序，对承受内压、在侧面受到激光辐照的圆柱壳的热力学响应进行了数值模拟，展现了圆柱壳热软化、鼓包和爆裂的动态失效过程。

In this paper, two types of isoparametric finite element are used to predict surface pressure distribution on the three dimensional wing which are placed in the subcritical steady flow by the variational FEM.

本文使用了两种类型等参元，通过变分法，计算了三维机翼亚临界定常位势流中的压力分布，计算结果与试验结果符合较好。

The simulation for the node-source field of cylinder with FEM

圆柱体点源场有限单元模拟

Coupled Thermo-mechanical Analysis of Hot Longitudinal Indentation Process by Rigid Thermo-viscoplastic FEM

高温纵向压印过程的有限元热力耦合分析复合材料身管热-结构耦合分析与优化

Emulation introduces ANSYS software, analyzes stable heat conduction of thermoelectric device and transient heat conduction of thermoelectric micro-generator by finite element method ( FEM), and provides calculation and optimization for further design and analysis.

仿真介绍了ANSYS仿真软件，对热电器件进行了稳态的热分析，对热电式微电源整体的传热进行了瞬态的热分析。通过仿真来实现对热电式微电源的整体设计的优化。

Application of Parametric FEM Program in Thermal Load Analysis of Piston

参数化有限元程序在活塞热负荷分析中的应用

Nonlinear thermal coupling FEM was used to investigate the temperature field and thermal deformation of roll sleeve during twin-roll strip casting.

利用非线性热力耦合有限元方法，对浇铸过程中结晶辊辊套的温度场分布进行了研究，并同时计算出了结晶辊的热变形。

Visualization of FEM analysis data of space pole structure

空间杆系结构有限元计算结果的可视化

The Structure Analysis of the Agricultural Truck Based on FEM Model

基于有限元模型的农用货车车架结构分析

A Influence of the Metal Flow Stress Model to FEM Numerical Simulation

金属材料流动应力模型对有限元仿真结果的影响

Curved thick shell FEM analysis of curved plate arch bridge and its test study

弯板拱桥曲厚壳元分析及其试验研究

FEM Analysis for Integrated Stress of Dies During Hot Forging Process

锻模综合应力有限元仿真分析

Non-linear FEM Analysis and Research of Bearing Prestressed Steel Beam

承重型预应力钢梁非线性有限元分析与研究

Static oxidation test and thermal fatigue test of thermal barrier coating structures were conducted along with related FEM analysis.

进行了涂层高温氧化实验、带涂层构件热疲劳实验及有限元模拟研究。

FEM model of transient thermal field of casting processing

铸件成形过程非稳定温度场的有限元模型

Nonlinear Stochastic FEM and its Application for Reliability Analysis

非线性随机有限元法及其在可靠度分析中的应用

Thick shell FEM analysis of a skewed treble box culvert and its photoelastic test

斜交箱形涵桥厚壳元分析及其光弹试验

Neutron shielding components design concept and structure features of ITER ( International Thermonuclear Experimental Reactor) vacuum vessel were briefly introduced. Static and thermo-structure coupling analyses were performed based on FEM ( finite element method) software ANSYS, respectively.

根据ITER（International thermonuclear experimental reactor）真空室中子屏蔽组件的设计概念和结构特点，应用有限元分析软件ANSYS对结构组件进行静力学分析和热&结构耦合分析。

3D FEM for Temperature Field and Magnetic Field in Lifting Magnet

用有限元法计算起重电磁铁中三维温度场和磁场

Temperature Field and Thermal-stress FEM Analysis of Solid Board of Large-sized Magnesium Alloy Die Casting Machine

超大型镁合金压铸机定型板温度场及热应力的有限元分析

The numerical results of FEM are in good agreement with the experimental results.

有限元计算与试验实测结果吻合良好。

Volume Changing of Material in FEM Simulation of Metal Forming

金属塑性成形有限元模拟中材料体积变化

A rigid pushing model based-on 3D thermo-mechanical coupled analysis with FEM was used to simulate wire and rod multi-pass continuous rolling process.

基于三维热-机耦合有限元分析方法建立了刚性体推动模型，模拟棒线材多道次连轧过程。